0

Suspension Components

Which part of the chassis actually needs replacing – the dampers, the springs or the links that hold the wheel in place? In this category we bring together suspension parts, from shock absorbers and coilover kits to control arms, anti-roll bars and lift kits. It is aimed both at you with a sports car and at you with a pickup or SUV.

What the suspension does for your car

The suspension keeps the tyres in contact with the road and controls how the body moves under braking, acceleration and cornering. The springs carry the car's weight and determine ride height, while the shock absorbers dampen the springs' movements. Control arms, ball joints and links hold the wheel in position, and an anti-roll bar can reduce body roll in corners. Worn parts can typically be felt as a floaty ride, imprecise steering or uneven tyre wear.

How to choose suspension parts

Start with what the car will be used for. A road and track project has different requirements than a pickup that needs to be lifted for bigger tyres. Pay particular attention to:

  • Ride height: lowering kits and coilover kits lower the car, while lift kits raise it. Coilovers are often height-adjustable, depending on the model.
  • Adjustment: some dampers have adjustable damping, others are fixed. Adjustability allows fine-tuning but requires time for setup.
  • Comfort versus control: a stiffer spring can give less body roll, but also a busier ride on poor roads. Spring rate, damping and tyres need to work together.
  • Wheel alignment: when the height changes, camber and toe typically change too. Camber and caster kits can make it possible to correct this.

Fitment and installation

The parts are developed for specific car models, model years and drivetrains, so always check the part number against your car. This can be seen, for example, with dampers for the Ford F-250/F-350 Super Duty 4WD, which are available for different lift heights, and with kits for the Cayman (981) or Fiat 500X. After fitting springs, dampers or control arms, the car should have a wheel alignment, and working with compressed springs requires the correct tools. If you hear knocking or feel play, the cause may also lie in the bushings and mounts.

Brands and maintenance

In this category you will find parts from brands such as Moog, Bilstein, QA1, KYB and AST. What suits your project is determined by car model, use and desired ride height rather than by brand alone. Look out for leaking dampers, cracked shock absorber boots and play in ball joints, and inspect adjustable parts regularly, especially after track or off-road driving.

Frequently asked questions

Does the car need an inspection after lowering or lifting?

It depends on the car, the product and how much the height is changed. Changes to the suspension and ride height may require an inspection or documentation, so check the requirements and any approval for the specific part number before you fit it.

What is the difference between a lowering kit and a coilover kit?

A lowering kit typically consists of shorter springs, possibly with matched dampers, and gives a fixed ride height. A coilover kit combines spring and damper in one unit and is often height-adjustable, some also in damping.

Should shock absorbers be replaced in pairs?

It is typically recommended to replace dampers in pairs on the same axle so that both sides damp equally. A new damper next to a worn one can cause uneven behaviour under braking and in corners.

Why does the car need a wheel alignment after installation?

New springs, dampers, control arms or a change in ride height can alter camber, caster and toe. Incorrect alignment can cause uneven tyre wear and affect steering, so a wheel alignment should typically follow the work.

View as Grid List
Sort by
Display per page

TOYOTA SECONDARY LONG TRVL 2.5 RR PAIR

ico59703P-CB
ICON Toyota Secondary Long Travel 2.5 Series Shocks RR - Pair
1.505,67 € excl. VAT

TOYOTA SECONDARY STCK TRVL 2.5 RR PAIR

ico59702P-CB
ICON Toyota Secondary Stock Travel 2.5 Series Shocks RR - Pair
1.505,67 € excl. VAT

Toyota Sequoia, Rear, '01-'07, 4600

bil24-241656
Bilstein B6 2001 Toyota Sequoia Limited Rear 46mm Monotube Shock Absorber
141,51 € excl. VAT

Toyota Sequoia; '08- ; R; B6 4600

bil33-187266
Bilstein B6 4600 Series 08-16 Toyota Sequoia 5.7/4.6L Rear Shock Absorber
140,24 € excl. VAT

TOYOTA SEQUOIA; '23+; NON-AIR; R; B6 460

bil24-332927
Bilstein 2023+ Toyota Sequoia B6 4600 Non-Adjustable Monotube Shock Absorber - Rear
140,10 € excl. VAT

Toyota Sequoia; 23+; Non-Air; R; B8 5100

bil24-332903
Bilstein 23-24 Toyota Sequoia (Non Air) B8 5100 Rear Shock Absorber - 0-1.5in Lift
144,35 € excl. VAT

Toyota Supra A9;K;EVO SE

bil49-304619
Bilstein 19-24 BMW Z4 / 20-25 Toyota GR Supra EVO SE Front & Rear Suspension Kit
3.641,10 € excl. VAT

Toyota Tacoma '05-, 650lb, 6112/8112

bil53-291387
Bilstein B12 (Special) 03-18 Toyota 4Runner Front Suspension Kit
337,95 € excl. VAT

Toyota Tacoma '05-, R, B8 5160

bil25-311259
Bilstein 5160 Series 05-23 Toyota Tacoma Monotube Shock Absorber Rear 0-1.5in Lift
342,05 € excl. VAT

Toyota Tacoma '24+; F; B8 5100; 1-2.5"

bil24-333207
Bilstein 24-25 Toyota Tacoma B8 5100 Series Front 46mm Adjustable Monotube Shock Absorber
221,49 € excl. VAT

Toyota Tacoma '24+; F; B8 6112; 1-2.5"

bil47-333246
Bilstein 2024+ Toyota Tacoma (Ex. 4WD w/ Leaf Rear Sus.) B8 6112 Suspension Kit - 1-2.5in Front Lift
1.247,14 € excl. VAT

Toyota Tacoma '24+; R; B8 5100; 0-1.5"

bil24-333214
Bilstein 24-25 Toyota Tacoma B8 5100 Series Rear 46mm Non-Adjustable Monotube Shock Absorber
150,22 € excl. VAT

Toyota Tacoma 2WD 5-lug, '83;FR;B6

bil24-185066
Bilstein B6 2005 Toyota Tacoma Base RWD Front Right 36mm Monotube Shock Absorber
132,33 € excl. VAT

Toyota Tacoma 4WD AIO Analog

fir2875
Firestone 05-23 Toyota Tacoma 4WD AIO Analog Ride-Rite All-In-One Kit (W217602875)
1.208,41 € excl. VAT

Toyota Tacoma 4x4 2016- Front, B6 4600

bil24-265966
Bilstein 4600 Series 2016 Toyota Tacoma Limited V6 3.5L Front 46mm Monotube Shock Absorber
142,78 € excl. VAT

Toyota Tacoma 4x4; '95.5-04; RL; B8 5160

bil25-311327
Bilstein 96-04 Toyota Tacoma 4WD B8 5160 Series Rear Left Shock Absorber
341,61 € excl. VAT

Toyota Tacoma 4x4; '95.5-04; RR; B8 5160

bil25-311334
Bilstein B8 95.5-04 Toyota Tacoma Base Rear Right 36mm Monotube Shock Absorber
341,09 € excl. VAT

Toyota Tacoma 8112; Module Assy; FR; EVO

bil41-322697
Bilstein B8 8112 Series 05-22 Toyota Tacoma Zone Control CR Front Right Corner Module
1.403,18 € excl. VAT

Toyota Tacoma; '24+; R; Leaf; B8 5160MD

bil25-349697
Bilstein 2024+ Toyota Tacoma (RWD w/ Rear Leaf Spring Susp.) B8 5160 Rear Shock - 0-1.5in Lift
345,20 € excl. VAT