0

Pistons & Piston Rings

Do your cylinders need to be bored out, or does your engine need to handle more boost than it did from the factory? This category brings together pistons, piston sets, piston rings, wrist pins and circlips for rebuilding and building engines – for you who assemble the engine yourself or are planning a bigger project.

Pistons, rings and pins work together

The piston transfers combustion pressure via the wrist pin to the connecting rod, while the piston rings seal against the cylinder wall and control the oil. Circlips hold the pin in place in the piston. You can choose complete piston sets or individual parts such as piston rings and wrist pins. If the bottom end also needs strengthening, connecting rods and bearings are typically part of the same project.

How to choose pistons and piston rings

Start with the engine's dimensions and purpose, then choose based on these criteria:

  • Bore and oversize: The piston must match the cylinder's finished size. The range includes, for example, standard size and oversizes such as .020 and .040 inch, and the final size depends on how the block is machined.
  • Compression and crown shape: Crown volume (e.g. -14cc or -21cc) and compression ratio affect how much boost and which fuel the engine can run. Valve reliefs may be necessary if you switch to a different camshaft.
  • Ring pack: Ring heights such as 1.0 x 1.0 x 2.0 mm or 1.2 x 1.5 x 2.0 mm must match the piston's ring grooves.
  • Coating: Some pistons have a coated crown or skirt, which can reduce friction and wear – the effect depends on the product.

In this category you will find Wiseco, JE Pistons, CP Pistons, Mahle and Mahle OE, among others, e.g. Mahle pistons for Dodge 12V and 24V diesel engines. Check piston-to-wall clearance, ring end gap and ring orientation according to the manufacturer's instructions before assembling the engine, and follow the recommended break-in procedure.

Frequently asked questions

Should I use standard size or oversize?

It depends on the cylinder's dimensions after measuring. If the cylinder is worn or scored, it is typically bored out, and the piston is chosen to match the finished size. Have an engine machine shop measure the block before you order.

Can I reuse the old piston rings?

This is typically not recommended. The rings wear in against the cylinder wall, and new rings normally give the best seal. If you replace the pistons or hone the cylinders, the rings should also be replaced.

Why is the ring end gap important?

The rings expand when they get hot. If the gap is too small, the ends can butt together and damage the piston and cylinder. The correct gap depends on bore, use and boost – follow the ring manufacturer's instructions.

Should wrist pins and circlips be replaced along with the pistons?

Piston sets often include pins and clips, but it depends on the product. Circlips should typically always be new, as they can lose tension when removed.

View as Grid List
Sort by
Display per page

Chevy LS -4.2cc Flat Top 1.299 X 3.780

wisRED0053X378
Wiseco Chevy LS1/LS2 RED Series Piston Set 3780in Bore 1299in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.299 X 3.790

wisRED0053X379
Wiseco Chevy LS1/LS2 RED Series Piston Set 3790in Bore 1299in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.299 X 3.800

wisRED0053X380
Wiseco Chevy LS1/LS2 RED Series Piston Set 3800in Bore 1299in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.326 X 3.780

wisRED0052X378
Wiseco Chevy LS1/LS2 RED Series Piston Set 3780in Bore 1304in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.326 X 3.780

wisRED0051X378
Wiseco Chevy LS1/LS2 RED Series Piston Set 3780in Bore 1330in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.326 X 3.790

wisRED0052X379
Wiseco Chevy LS1/LS2 RED Series Piston Set 3790in Bore 1304in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.326 X 3.790

wisRED0051X379
Wiseco Chevy LS1/LS2 RED Series Piston Set 3790in Bore 1330in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.326 X 3.800

wisRED0052X380
Wiseco Chevy LS1/LS2 RED Series Piston Set 3800in Bore 1304in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS -4.2cc Flat Top 1.326 X 3.800

wisRED0051X380
Wiseco Chevy LS1/LS2 RED Series Piston Set 3800in Bore 1330in Compression Height - Set of 8
1.006,35 € excl. VAT

Chevy LS 6.0 -9.7cc 1.311 x 4.000

wisK0045XS
Wiseco Chevrolet LSX 6.0 4.000in Bore 9.7cc Dome 0.945 Pin Dia Piston Kit
1.262,67 € excl. VAT

Chevy LS 6.0 -9.7cc 1.311 x 4.005

wisK0045X05
Wiseco Chevy LS 4.005in Bore 1.311in CH -9.70 CC Piston Set
1.271,61 € excl. VAT

Chevy LS 6.0 -9.7cc 1.311 x 4.010

wisK0045X1
Wiseco Chevy LSX 6.0L -9.7cc Dish 4.01in Bore .945in Pin NA/Boost/Nitrous Drop-In Pistons
1.271,18 € excl. VAT

Chevy LS 6.0 -9.7cc 1.311 x 4.020

wisK0045X2
Wiseco Chevy LSX 6.0L -9.7cc Dish 4.02in Bore .945in Pin NA/Boost/Nitrous Drop-In Pistons
1.271,18 € excl. VAT

Chevy LS 6.0 -9.7cc 1.311 x 4.030

wisK0045X3
Wiseco Chevy LS 4.030in Bore 1.311in CH -9.70 CC Piston Set
1.264,34 € excl. VAT

Chevy LS 6.0 -9.7cc 1.311 x 4.035

wisK0045X35
Wiseco Chevy LS 4.035in Bore 1.311in CH -9.70 CC Piston Set
1.264,34 € excl. VAT

Chevy LS -8cc FT 1.115 x 4.130

wisK395X130
Wiseco Chevy LS Series -8cc FT 4.130inch Bore Piston Shelf Stock Kit
1.118,08 € excl. VAT

Chevy LS -8cc FT 1.115 x 4.135

wisK395X135
Wiseco Chevy LS Series -8cc FT 4.135inch Bore Piston Shelf Stock Kit
1.118,08 € excl. VAT

Chevy LS -8cc FT 1.115 x 4.155

wisK395X155
Wiseco Chevy LS Series +8cc Flat Top 4.125in Bore Forged Aluminum Piston Kit
1.133,65 € excl. VAT

Chevy LS -8cc FT 1.115 x 4.185

wisK395X185
Wiseco Chevy LS Series -8cc R/Dome 1.115 CH 4.125in Bore - Set of 8
1.133,65 € excl. VAT

Chevy LS Series -11cc R/Dome 1.050x3.903

wis6450RX3903
Wiseco Chevy LS Series -11cc R/Dome 1.050x3.903 Piston Shelf Stock
190,55 € excl. VAT

Chevy LS Series -11cc R/Dome 1.050x3.903

wisK450X3903
Wiseco Chevy LS Series -11cc R/Dome 1.050x3.903 Piston - Special Order
1.286,19 € excl. VAT