0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

Russell FUEL HOSE KIT

rus641360
Russell Performance -8 AN to -8 AN ProFlex King Demon Carb Dual Inlet Carb Kit (Red/Blue)
184,16 € excl. VAT

Russell FUEL HOSE KIT

rus641183
Russell Performance -8 AN to -8 AN ProClassic Demon Carb Dual Inlet Carb Kit (Black/Silver)
151,32 € excl. VAT

Russell FUEL HOSE KIT

rus641160
Russell Performance -8 AN to -8 AN Twist-Lok Holley 4150 Dual Inlet Carb Kit (Red/Blue)
115,49 € excl. VAT

Russell FUEL HOSE KIT

rus641280
Russell Performance -8 AN to -8 AN ProFlex Demon Carb Dual Inlet Carb Kit (Red/Blue)
183,33 € excl. VAT

Russell FUEL HOSE KIT

rus641151
Russell Performance -8 AN to -8 AN ProFlex Holley 4150 Dual Inlet Carb Kit (Endura)
139,62 € excl. VAT

Russell FUEL HOSE KIT

rus641155
Russell Performance -8 AN to -8 AN ProClassic II Holley 4150 Dual Inlet Carb Kit (Black)
139,47 € excl. VAT

Russell FUEL HOSE KIT

rus641350
Russell Performance -8 AN to -8 AN ProFlex Holley 4500 Dual Inlet Carb Kit (Red/Blue)
139,86 € excl. VAT

Russell FUEL HOSE KIT

rus641090
Russell Performance -6 AN to 3/8in Female NPT ProFlex Holley 4150 Dual Inlet Carb Kit (Red/Blue)
94,62 € excl. VAT

Russell FUEL HOSE KIT

rus641053
Russell Performance Universal fuel pump to carb. Tube seal ends. (3 ft. length)
60,63 € excl. VAT

Russell FUEL HOSE KIT

rus641093
Russell Performance -6 AN to 3/8in Female NPT ProClassic Holley Dual Inlet Carb Kit (Black/Silver)
94,52 € excl. VAT

Russell FUEL HOSE KIT

rus641140
Russell Performance -8 AN to -8 AN ProFlex Holley 4500 Dual Inlet Carb Kit (Red/Blue)
139,38 € excl. VAT

Russell FUEL HOSE KIT

rus641253
Russell Performance -6 AN to 3/8in Female NPT ProClassic Demon Dual Inlet Carb Kit (Black/Silver)
150,33 € excl. VAT

Russell FUEL LINE ADAPTER

rus620165
Russell Performance REPLACEMENT FERRULE FOR ALUM FUEL LINE ADAPTERS #8 QTY OF 2
18,88 € excl. VAT

Russell FUEL LINE ADAPTER

rus620155
Russell Performance REPLACEMENT FERRULE FOR ALUM FUEL LINE ADAPTERS #6 QTY 2
17,66 € excl. VAT

Russell FUEL PSI ADAPTER

rus640790
Russell Performance -8 AN Blue 90 Degree Fuel Pressure Adapter
27,31 € excl. VAT

Russell FUEL PSI ADAPTER

rus670000
Russell Performance -6 AN Fuel Union Pressure Adapter (Blue)
24,85 € excl. VAT

Russell FUEL PSI ADAPTER

rus670060
Russell Performance -6 AN Flare to 3/8in Pipe Pressure Adapter (Blue)
27,26 € excl. VAT

Russell FUEL PSI ADAPTER

rus670001
Russell Performance -6 AN Fuel Union Pressure Adapter (Endura)
24,85 € excl. VAT

Russell FUEL PSI ADAPTER

rus670080
Russell Performance -8 AN Flare to 3/8in Pipe Pressure Adapter (Blue)
27,27 € excl. VAT

Russell FUEL PSI ADAPTER

rus670083
Russell Performance -6 AN Flare to 3/8in Pipe Pressure Adapter (Black)
27,27 € excl. VAT

Russell FUEL PSI ADAPTER

rus670081
Russell Performance -6 AN Flare to 1/4in Pipe Pressure Adapter (Endura)
27,27 € excl. VAT

Russell FUEL PSI ADAPTER

rus670010
Russell Performance -8 AN Fuel Union Pressure Adapter (Blue)
32,06 € excl. VAT

Russell FUEL PSI ADAPTER

rus670011
Russell Performance -8 AN Fuel Union Pressure Adapter (Endura)
32,06 € excl. VAT

Russell FUEL PSI ADAPTER

rus670063
Russell Performance -6 AN Flare to 3/8in Pipe Pressure Adapter (Black)
27,26 € excl. VAT