0

Engine Gaskets & Seals

Is your engine stripped down on the bench, or does a single joint need sealing again? This category brings together gaskets for the engine's fixed joints: cylinder head, intake manifold, valve cover, oil pan and thermostat housing, as well as complete gasket sets. It is for you if you are rebuilding, maintaining or building a project with more power.

What engine gaskets need to do

Gaskets seal where two engine parts meet and keep compression, oil and coolant separated. The head gasket is typically the most heavily loaded, because it has to withstand combustion pressure and heat and, in a turbo project, higher boost pressure as well. Among our head gaskets you will find, for example, Cometic Gasket in several bores and thicknesses. For the smaller joints there are intake manifold gaskets as well as gaskets for the valve cover, oil pan and thermostat housing. The category also includes cylinder base gaskets for motorcycles, such as the Kawasaki ZX-6R and Suzuki GSXR.

How to choose the right gasket

  • Bore: The hole in the head gasket must match the cylinder bore, including after any overboring.
  • Thickness: Affects the compression ratio and the clearance between piston and cylinder head, so it should be calculated for your project.
  • Material: MLS – multi-layer steel –, copper or composite. The choice depends on boost pressure, power target and the condition of the surfaces.
  • Engine code and model year: Fitment depends on the specific engine, so match the part number to the engine code and model year.

If the engine has to come apart anyway, a complete gasket set typically covers several joints at once. Fel-Pro, for example, offers intake manifold gasket sets for the Ford Mustang and Dodge Challenger and Charger, and Victor Reinz, Vertex Pistons and Wiseco are also brands in the category. A good seal typically depends on clean, flat surfaces, correct tightening torque and sequence, and new bolts where the manufacturer specifies them. Only use sealant if the gasket manufacturer recommends it. Gaskets for the exhaust manifold can be found under exhaust gaskets and seals.

Frequently asked questions

How do I choose the head gasket thickness?

The thickness affects the compression ratio and the clearance between piston and cylinder head. Calculate it for your project, especially if the cylinder head or block has been surfaced or the pistons have been replaced, and follow the manufacturer's instructions for the specific part number.

Can I reuse an old gasket?

It is typically not recommended. Many gaskets, such as MLS types, deform when first tightened and rarely seal as well a second time. It depends on the type, so check the manufacturer's instructions for the specific gasket.

What are the signs of a blown head gasket?

Typical signs can be coolant loss without visible leaks, white smoke, bubbles in the expansion tank, oil mixed with coolant or overheating. The symptoms can have other causes, so a compression or leak-down test gives a more reliable answer.

Should I choose a complete gasket set or individual gaskets?

If the engine is being fully disassembled, a gasket set typically covers most joints at once. If you only need to seal, for example, the valve cover or thermostat housing, a single gasket is often enough. Always check what the set contains for your part number.

View as Grid List
Sort by
Display per page

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5433-098
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .098in MLS Cylinder Head Gasket - 4.570in Bore
166,52 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5433-030
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .030in MLS Cylinder Head Gasket - 4.570in Bore
116,09 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5433-027
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .027in MLS Cylinder Head Gasket - 4.570in Bore
116,09 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5434-060
Cometic Brodix Chevrolet Big Duke / Brodie 4.63in Bore .060in MLS Head Gasket
152,89 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5434-120
Cometic Chevy Mark-IV GM Gen-V/VI BB 4.630in Bore .120in MLS Head Gasket
269,47 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5433-045
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .045in MLS Cylinder Head Gasket - 4.570in Bore
121,94 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5433-036
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .036in MLS Cylinder Head Gasket - 4.570in Bore
116,12 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5434-092
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .092in MLS Cylinder Head Gasket - 4.630in Bore
166,47 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5433-075
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .075in MLS Cylinder Head Gasket - 4.570in Bore
153,24 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5433-066
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .066in MLS Cylinder Head Gasket - 4.570in Bore
153,20 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5432-066
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .066in MLS Cylinder Head Gasket - 4.310in Bore
153,20 € excl. VAT

Chev Mark-IV, GM Gen-V/VI V8 Head Gasket

cgsC5432-045
Cometic Chevrolet Mark-IV - GM Gen-V/VI Big Block V8 .045in MLS Cylinder Head Gasket - 4.310in Bore
121,94 € excl. VAT

Chev Mark-IV. GM Gen-V BB V8 Timing Kit

cgsC5650
Cometic Chevrolet Mark-IV GM Gen-V Big Block V8 .031in Fiber Timing Cover Gasket Kit
38,86 € excl. VAT

Chev Mark-IV. GM Gen-V BB V8 Timing Kit

cgsC5650AFM
Cometic Chevrolet Mark-IV GM Gen-V Big Block V8 .032in AFM Timing Cover Gasket Kit
38,86 € excl. VAT

Chev Mark-IV. GM Gen-V BB V8 Timing Kit

cgsC5057
Cometic Chevrolet Mark-IV GM Gen-V Big Block V8 Timing Cover Gasket Kit
29,35 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Pack

cgsC5320
Cometic Chevy Mark-IV BB V8 .060in Fiber Intake Mani Gasket-2.050in x 1.820in Oval Ports-10 Pack
176,09 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC5342-125
Cometic GM Gen-V/VI BB V8 .125in Fiber Intake Mani Gasket Set-2.460in x 1.860in Rect. Ports
69,57 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC15041-125
Cometic GM Gen-V/VI BB V8 .125in KF Fiber Intake Mani Gasket Set-1.848in x 2.042in Oval Port
47,76 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC5335
Cometic GM Gen-V/VI BB V8 .060in Fiber Intake Mani Gasket Set-1.850in x 2.075in-No Cross Over
63,23 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC15689-060
Cometic Chevy Mark-IV Big Block V8 .060in Fiber Intake Mani Gasket Set-1.835in x 2.578in Rec. Port
43,44 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC5342-060
Cometic GM Gen-V/VI BB V8 .060in Fiber Intake Mani Gasket Set-2.460in x 1.860in Rect. Ports
62,73 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC15304
Cometic GM Gen-V/VI BB V8 .125in Fiber Intake Mani Gasket Set-1.750in x 2.500in Rect. Port
54,90 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC15693-060
Cometic Chevy Mark-IV Big Block V8 .060in Fiber Intake Mani Gasket Set-1.811in x 2.052in Rec. Port
43,44 € excl. VAT

Chev Mark-IV. GM Gen-V/VI BB Intake Set

cgsC5649-060
Cometic Chevy Mark-IV GM Gen V/VI Big Block V8 .060in Fiber Intake Manifold Gasket Set
44,18 € excl. VAT