0

U-Bolts

Has your vehicle been fitted with new suspension, different leaf springs or another axle, so the original U-bolts no longer fit? This category contains U-bolts, washers and nuts that clamp the axle to the leaf springs. It is for you if you are modifying your vehicle or replacing rusty and worn mounting hardware.

What U-bolts do in the chassis

The U-bolts hold the axle firmly against the leaf springs and take a large share of the loads from the road and terrain. If the spring pack gets thicker, or a block is fitted between spring and axle, the bolts typically need to be longer. Here you will find, for example, axle U-bolts from Skyjacker and U-bolts from Old Man Emu. The category also includes parts from Superlift, Tuff Country and Fabtech.

How to choose U-bolts

  • Diameter and thread: must match the holes in the spring plate and the nuts.
  • Inside width: measured between the legs, so the bolt fits snugly around the axle tube or spring seat.
  • Length: depends on the thickness of the spring pack, any block and room for washer and nut.
  • Bend shape: round or square, depending on the shape of the axle tube and spring seat.

Measure your existing bolts and the new stack, and compare with the dimensions for the specific part number.

Installation and maintenance

Use new washers and nuts when you replace U-bolts. We also stock them as separate parts. Tighten in a crisscross pattern and evenly to the manufacturer's torque. Typically re-torque after the first few kilometres, as the spring pack can settle. For other jobs, see universal bolts, engine bolts or the full range of bolts.

Frequently asked questions

Do the U-bolts need to be longer after a suspension lift?

Often yes, if the lift results in a thicker spring pack or a block between spring and axle. Measure the new stack and allow room for washer and nut so the nut gets full thread engagement.

Can I reuse my old U-bolts?

This is generally not recommended. U-bolts can stretch when tightened, and the thread may be rusty or damaged. New bolts, washers and nuts give more consistent and safer tightening.

Does a modification with new U-bolts need to be approved at inspection?

It depends on the vehicle and the overall modification. Replacing U-bolts alone rarely requires approval, but a suspension lift may. Check the requirements for the specific part number and your vehicle.

View as Grid List
Sort by
Display per page

FABTECH FTS350UBK U-BOLT KIT

fabFTS350UBK
Fabtech Square U-Bolt Kit - 9/16-18 x 10.50 x 3.00
91,87 € excl. VAT

FABTECH FTS352UBK U-BOLT KIT

fabFTS352UBK
Fabtech Semi-Round U-Bolt Kit - 9/16-18 x 11.50 x 3.08
91,45 € excl. VAT

FABTECH FTS723 U-BOLT KIT

fabFTS723
Fabtech Round U-Bolt Kit - 9/16-18 x 10.63 x 3.25
90,81 € excl. VAT

FABTECH FTS726 U-BOILT KIT

fabFTS726
Fabtech Square U-Bolt Kit - 5/8-18 x 14.50 x 2.63
120,70 € excl. VAT

FABTECH FTS737 U-BOLT KIT

fabFTS737
Fabtech Square U-Bolt Kit - 9/16-18 x 12.50 x 3.10
92,92 € excl. VAT

FABTECH FTS738 U-BOLT KIT

fabFTS738
Fabtech Round U-Bolt Kit - 9/16-18 x 12.50 x 4.00
89,13 € excl. VAT