0

Brake Systems

Do you want your car to brake more consistently on the road, or does your project need brakes that can handle the heat of a track day? Here you will find parts for the entire brake system – from disc and drum brakes to master cylinders, brake boosters, handbrakes and valves – for daily driving, restoration and motorsport.

What the brake system components do

The brake system converts the pressure from the pedal into friction at the wheels. The master cylinder and brake booster create and amplify the hydraulic pressure, while disc brakes or drum brakes convert it into braking force. Valves control the pressure: a proportioning valve can adjust the balance between the front and rear axle, and a residual pressure valve can maintain a low pressure in the system, typically with drum brakes. On top of that come handbrakes, vacuum pumps for engines with too little vacuum for the booster, and exhaust brakes for diesel engines.

How to choose brake parts

Start with how the car is used. For daily driving, it is about smooth braking performance and low noise. For hard driving, heat tolerance is important, because overheating can cause braking performance to fade. Consider, among other things:

  • Use and temperature: The pad compound and rotor type should match how hot the brakes get.
  • Rotor type: Drilled, slotted and two-piece rotors, e.g. from DBA for the Nissan GT-R, 370Z and Corvette C6, are alternatives to solid rotors. Whether they offer an advantage depends on the car and its use.
  • Balance: Larger rotors or calipers on one axle can change the brake bias and may require adjustment.
  • Fitment: Wheels, hubs and existing calipers determine what can be fitted. Some rotors are only designed for specific factory systems.

In this category you will find brands such as Wilwood, EBC, PowerStop, R1 Concepts and Brembo, as well as complete kits, e.g. Baer Brakes' rear brake kits for classic GM rear axles. If you change calipers, check whether the master cylinder's capacity is still suitable, so that pedal travel and pressure are not changed undesirably.

Installation and maintenance

Brakes are safety-critical, so installation should be carried out by someone with experience, and the system must be bled afterwards. Use the correct tightening torques and the right hardware – for two-piece rotors, for example, separate bolts and nuts are available. Brake fluid absorbs moisture over time and can boil under hard use, which can result in a soft or long pedal. That is something different from overheated pads and rotors losing friction. So change the fluid regularly and check the wear on pads and rotors.

Frequently asked questions

Are drilled and slotted brake rotors better than solid rotors?

Not necessarily. Drilled and slotted rotors can help carry gas and heat away, but whether they offer an advantage depends on the car, the pads and the use. Solid rotors can be just as suitable.

Do new brake parts need to be approved for inspection?

It depends on the product and the car. Check the approval, e.g. E-mark or R90 for pads and rotors, for the specific part number, and find out whether changes to the brake system must be declared at the vehicle inspection.

Why does the brake pedal become soft or long?

It can be caused by air in the system or by brake fluid that has absorbed moisture and boils at high temperatures. Bleeding and fresh fluid of the right type often solve the problem.

Do I need to replace the master cylinder when I upgrade the brakes?

It depends on the change. Calipers with different piston sizes can require a different fluid volume, so the pedal travel changes. Check whether the existing master cylinder suits the new system.

Brake Systems
View as Grid List
Sort by
Display per page

FLEXLINE KIT,FRONT,VW GOLF

wil220-8339
Wilwood Flexline Kit 1999 1/2-2003 Golf IV
114,59 € excl. VAT

FLEXLINE KIT,INTEGRA/CIVIC,OEM,262mm

wil220-6420
Wilwood Flexline Kit 00-03 Civic SI 94-01Integra w/Forged Dynalite Front Caliper
106,22 € excl. VAT

FLEXLINE KIT,MUSTANG,94-UP

wil220-6458
Wilwood Flexline Kit 94-03 Mustang w/ SL6 Front Caliper
119,61 € excl. VAT

FLEXLINE KIT,REAR,CPB,HONDA ACURA,18in.

wil220-10840
Wilwood Flexline Kit Rear Honda / Acura w/ Combination Parking Brake Caliper
137,15 € excl. VAT

FLEXLINE,BRAKE,16in. OAL,-3 HOSE,-3

wil220-8523
Wilwood 16in OAL Flexline -3 Hose to -3 Female 90 Degree
42,73 € excl. VAT

GEOSPEC Rotor - Blank

dfc604-80047
DFC 06-15 Mazda MX-5 Miata Front GeoSPEC Coated Rotor
92,66 € excl. VAT

GEOSPEC Rotor - Blank

dfc604-80074
DFC 16-25 Mazda MX-5 Miata Front GeoSPEC Coated Rotor
88,91 € excl. VAT

GEOSPEC Rotor - Drilled and Slotted

dfc634-63141
DFC 12-19 Mercedes-Benz GLS63 AMG Rear Drilled GeoSPEC Coated Rotor and Slotted
161,82 € excl. VAT

GEOSPEC Rotor - Slotted

dfc614-39020
DFC 05-23 Chrysler 300 Rear GeoSPEC Coated Rotor - Slotted
157,18 € excl. VAT